4MS Euro Power Distribution Eurorack Board Kit is a fully-featured bus board with several advanced features.
The do-it-yourself kit includes all the parts necessary to build a fully-featured Euro Power Distro Board. This is an intermediate-level kit, you need some prior experience, and have basic hand tools (flush snips, needle-nose pliers, small screw driver).
Kit for the 4ms Euro Power Distribution Board. Includes all components and PCB. Requires soldering. Fuses included will be 1.1A per rail
How to use:
The 4ms Euro Power Distro Board is designed to work with any +/-12V power supplies to bring clean power to your modules. A +5V rail can be generated on-board, or you use an external 5V supply.
First, connect your +12V and -12V power supply outputs to the appropriate tabs on the distro board, using 0.250" spade connectors. If you are using an external +5V power supply, connect it to the +5V tab, and remove the blue jumper on the Distro board. If you don't use an external +5V power supply, then 5V will be generated off the +12V line: simply leave the blue jumper in place.
Make sure the ground/0V on each supply is connected to the ground tab(s) of the Euro Power Distro board.
Why put fuses on the distro board?
Most likely you have fuses on your power supply, but if you draw too much current you might have to open the case up to replace the fuses. Also, it can be difficult to locate the problem when a fuse blows because the whole system goes down. By putting fuses on each rail and each bus board, a problem with power can be quickly pin-pointed to a particular row, and sometimes to a particular power rail. Each row in your system can function independently, so blowing a fuse on one row doesn't effect the other rows.
Why generate +5V on each rail?
The +5V rail is often used by digital modules, and can contain higher frequency noise than the other rails. High frequencies can bleed easily to other modules. An excellent method for reducing bleed or crosstalk over the power rails is to regulate each row separately. By putting a +5V regulator on the bus board, we can nearly eliminate the chances of noise on the +5V rail traveling between rowsHow much is my shipping?
Shipping costs are calculated automatically at checkout. Simply add items to your cart and proceed to the checkout page, where you'll see the available shipping options and their prices. VAT at the applicable rate for your country will also be displayed at checkout.
European Union orders:
- Standard shipping is free on orders over €100. Express shipping is available on orders over €100, and free on orders over €400.
Poland orders:
- Standard shipping is free on orders over 250 PLN. Express shipping is free on orders over 500 PLN.
What about local taxes?
By default prices on the site include sales tax at 20%. The precise sales tax rate for your country will be calculated at checkout.
Do you ship to my country?
We ship to all EU member states from our warehouse in Warsaw, Poland. Add an item to your cart and enter your country and postcode to see the available shipping options and prices for your location. If you have any questions about shipping to your country, drop us an email at info@signalsounds.eu and we'll be happy to help.
Shipping methods
All EU orders are shipped via UPS. We offer two service levels:
- UPS Standard – our default shipping option. Delivery times vary by country (see estimated delivery times below).
- UPS Express Saver – next business day delivery to most EU destinations.
Each product page shows the estimated delivery time for your location, so you'll always know what to expect before you order.
Estimated delivery times (Standard shipping)
The times below are estimates in working days from dispatch, based on UPS Standard service. Express Saver delivers by the next business day to most destinations.
| Country | Estimated delivery (working days) |
|---|---|
| Austria | 2–3 |
| Belgium | 2 |
| Bulgaria | 4–5 |
| Croatia | 2–4 |
| Cyprus | 10 |
| Czechia | 2–3 |
| Denmark | 3 |
| Estonia | 2–3 |
| Finland | 3–5 |
| France | 2–4 |
| Germany | 2 |
| Greece | 5–7 |
| Hungary | 2–3 |
| Ireland | 4–6 |
| Italy | 3–5 |
| Latvia | 2–3 |
| Lithuania | 1–2 |
| Luxembourg | 2 |
| Malta | 5–7 |
| Netherlands | 2 |
| Poland | 1–2 |
| Portugal | 4–5 |
| Romania | 3–4 |
| Slovakia | 2–3 |
| Slovenia | 2–3 |
| Spain | 4 |
| Sweden | 3–5 |
These times are estimates and are not guaranteed. Delivery may occasionally take a little longer due to customs processing, local conditions, or carrier delays.
Dispatch times
Orders placed before 15:00 CET (Central European Time) on a working day are normally dispatched the same day. Orders placed after 15:00 CET, or on weekends and public holidays, will be dispatched on the next working day.
If you have an urgent order, please email us at info@signalsounds.eu before placing your order and we'll do our best to accommodate you.
Pre-orders
If a product is listed as a pre-order, it means we've ordered it from the supplier but it's not physically in stock yet. The product listing will include an estimated shipping date based on the best information we have from the supplier, but do bear in mind this is subject to change and is not a guaranteed date.
If you place an order containing a mixture of in-stock and pre-order items, we'll normally hold off on shipping anything until the pre-order item(s) have arrived, rather than splitting it into multiple shipments. If you need the in-stock items sooner, we'd recommend placing separate orders. As always, please get in touch at info@signalsounds.eu if you have questions.
Product Overview
4MS Euro Power Distribution Eurorack Board Kit is a fully-featured bus board with several advanced features.
The do-it-yourself kit includes all the parts necessary to build a fully-featured Euro Power Distro Board. This is an intermediate-level kit, you need some prior experience, and have basic hand tools (flush snips, needle-nose pliers, small screw driver).
Kit for the 4ms Euro Power Distribution Board. Includes all components and PCB. Requires soldering. Fuses included will be 1.1A per rail
How to use:
The 4ms Euro Power Distro Board is designed to work with any +/-12V power supplies to bring clean power to your modules. A +5V rail can be generated on-board, or you use an external 5V supply.
First, connect your +12V and -12V power supply outputs to the appropriate tabs on the distro board, using 0.250" spade connectors. If you are using an external +5V power supply, connect it to the +5V tab, and remove the blue jumper on the Distro board. If you don't use an external +5V power supply, then 5V will be generated off the +12V line: simply leave the blue jumper in place.
Make sure the ground/0V on each supply is connected to the ground tab(s) of the Euro Power Distro board.
Why put fuses on the distro board?
Most likely you have fuses on your power supply, but if you draw too much current you might have to open the case up to replace the fuses. Also, it can be difficult to locate the problem when a fuse blows because the whole system goes down. By putting fuses on each rail and each bus board, a problem with power can be quickly pin-pointed to a particular row, and sometimes to a particular power rail. Each row in your system can function independently, so blowing a fuse on one row doesn't effect the other rows.
Why generate +5V on each rail?
The +5V rail is often used by digital modules, and can contain higher frequency noise than the other rails. High frequencies can bleed easily to other modules. An excellent method for reducing bleed or crosstalk over the power rails is to regulate each row separately. By putting a +5V regulator on the bus board, we can nearly eliminate the chances of noise on the +5V rail traveling between rowsTechnical Specs
Shipping Details
How much is my shipping?
Shipping costs are calculated automatically at checkout. Simply add items to your cart and proceed to the checkout page, where you'll see the available shipping options and their prices. VAT at the applicable rate for your country will also be displayed at checkout.
European Union orders:
- Standard shipping is free on orders over €100. Express shipping is available on orders over €100, and free on orders over €400.
Poland orders:
- Standard shipping is free on orders over 250 PLN. Express shipping is free on orders over 500 PLN.
What about local taxes?
By default prices on the site include sales tax at 20%. The precise sales tax rate for your country will be calculated at checkout.
Do you ship to my country?
We ship to all EU member states from our warehouse in Warsaw, Poland. Add an item to your cart and enter your country and postcode to see the available shipping options and prices for your location. If you have any questions about shipping to your country, drop us an email at info@signalsounds.eu and we'll be happy to help.
Shipping methods
All EU orders are shipped via UPS. We offer two service levels:
- UPS Standard – our default shipping option. Delivery times vary by country (see estimated delivery times below).
- UPS Express Saver – next business day delivery to most EU destinations.
Each product page shows the estimated delivery time for your location, so you'll always know what to expect before you order.
Estimated delivery times (Standard shipping)
The times below are estimates in working days from dispatch, based on UPS Standard service. Express Saver delivers by the next business day to most destinations.
| Country | Estimated delivery (working days) |
|---|---|
| Austria | 2–3 |
| Belgium | 2 |
| Bulgaria | 4–5 |
| Croatia | 2–4 |
| Cyprus | 10 |
| Czechia | 2–3 |
| Denmark | 3 |
| Estonia | 2–3 |
| Finland | 3–5 |
| France | 2–4 |
| Germany | 2 |
| Greece | 5–7 |
| Hungary | 2–3 |
| Ireland | 4–6 |
| Italy | 3–5 |
| Latvia | 2–3 |
| Lithuania | 1–2 |
| Luxembourg | 2 |
| Malta | 5–7 |
| Netherlands | 2 |
| Poland | 1–2 |
| Portugal | 4–5 |
| Romania | 3–4 |
| Slovakia | 2–3 |
| Slovenia | 2–3 |
| Spain | 4 |
| Sweden | 3–5 |
These times are estimates and are not guaranteed. Delivery may occasionally take a little longer due to customs processing, local conditions, or carrier delays.
Dispatch times
Orders placed before 15:00 CET (Central European Time) on a working day are normally dispatched the same day. Orders placed after 15:00 CET, or on weekends and public holidays, will be dispatched on the next working day.
If you have an urgent order, please email us at info@signalsounds.eu before placing your order and we'll do our best to accommodate you.
Pre-orders
If a product is listed as a pre-order, it means we've ordered it from the supplier but it's not physically in stock yet. The product listing will include an estimated shipping date based on the best information we have from the supplier, but do bear in mind this is subject to change and is not a guaranteed date.
If you place an order containing a mixture of in-stock and pre-order items, we'll normally hold off on shipping anything until the pre-order item(s) have arrived, rather than splitting it into multiple shipments. If you need the in-stock items sooner, we'd recommend placing separate orders. As always, please get in touch at info@signalsounds.eu if you have questions.
