Manufacturer's description
The P3 is a dual channel pedal interface. It can be used for pedal or line level in and out or as a guitar or bass input as the pedal in is a high-Z input that will not suck the life out of the tone of your instrument as low impedance inputs can do.
The module is designed to have more than 100kHz bandwidth in both directions to give you a very clean interface with in and out impedance to work well with pedals.
The two halves of the module are independent. You can use it as a dual mono or as a stereo interface.
Eurorack to pedal level is attenuating -18dB and pedal to Eurorack level is amplifying 18dB.
There is soft controlled symmetrical clipping in both directions through the module so if you are driving the inputs hard it will not sound harsh. You can use this as a creative effect.
The unit is AC coupled to be able to isolate your Eurorack from whatever you connect on the pedal side.
Eurorack to pedal
The Eurorack input has a symmetrical soft clipping at +/-10V.
A 5V signal (+14dBV) will give you a -4dBV signal out on the pedal out side (0,6V).
Pedal to Eurorack
The pedal input expects max -4dBV in to give a 5V signal out on the Eurorack side. However, the signal that comes from a pedal, the direct signal from a guitar or some line level equipment may have transients that are higher than this. This even if you are careful about the levels you put into it.
Because of this a limiter with a super soft long knee has been designed into the module so you don’t have to worry about getting harsh distortion on the transients.
The limiter just starts touching the signal slightly at -4dBV in and reaches full compression and symmetrical brick wall limiting with +6dBV in (2V). The output brick wall limits to +/-10V.
The limiter circuit is designed not to touch the signal at all under normal operations, it is there to add protection and maybe a bit of warmth when your signal is above -4dBV in. It can of cause be driven as hard as you like for creative purposes.
Bandwidth: More than 10 Hz to 100 kHz in both directions through the module.
Connect the power cable with the red stripe down towards the -12V marking. The unit is protected for reverse power.
- Width: 4HP
- Depth: 30mm
- Power: 19 mA +12V / 19 mA -12V / 0 mA 5V
How much is my shipping?
Shipping costs are calculated automatically at checkout. Simply add items to your cart and proceed to the checkout page, where you'll see the available shipping options and their prices. VAT at the applicable rate for your country will also be displayed at checkout.
European Union orders:
- Standard shipping is free on orders over €100. Express shipping is available on orders over €100, and free on orders over €400.
Poland orders:
- Standard shipping is free on orders over 250 PLN. Express shipping is free on orders over 500 PLN.
What about local taxes?
By default prices on the site include sales tax at 20%. The precise sales tax rate for your country will be calculated at checkout.
Do you ship to my country?
We ship to all EU member states from our warehouse in Warsaw, Poland. Add an item to your cart and enter your country and postcode to see the available shipping options and prices for your location. If you have any questions about shipping to your country, drop us an email at info@signalsounds.eu and we'll be happy to help.
Shipping methods
All EU orders are shipped via UPS. We offer two service levels:
- UPS Standard – our default shipping option. Delivery times vary by country (see estimated delivery times below).
- UPS Express Saver – next business day delivery to most EU destinations.
Each product page shows the estimated delivery time for your location, so you'll always know what to expect before you order.
Estimated delivery times (Standard shipping)
The times below are estimates in working days from dispatch, based on UPS Standard service. Express Saver delivers by the next business day to most destinations.
| Country | Estimated delivery (working days) |
|---|---|
| Austria | 2–3 |
| Belgium | 2 |
| Bulgaria | 4–5 |
| Croatia | 2–4 |
| Cyprus | 10 |
| Czechia | 2–3 |
| Denmark | 3 |
| Estonia | 2–3 |
| Finland | 3–5 |
| France | 2–4 |
| Germany | 2 |
| Greece | 5–7 |
| Hungary | 2–3 |
| Ireland | 4–6 |
| Italy | 3–5 |
| Latvia | 2–3 |
| Lithuania | 1–2 |
| Luxembourg | 2 |
| Malta | 5–7 |
| Netherlands | 2 |
| Poland | 1–2 |
| Portugal | 4–5 |
| Romania | 3–4 |
| Slovakia | 2–3 |
| Slovenia | 2–3 |
| Spain | 4 |
| Sweden | 3–5 |
These times are estimates and are not guaranteed. Delivery may occasionally take a little longer due to customs processing, local conditions, or carrier delays.
Dispatch times
Orders placed before 15:00 CET (Central European Time) on a working day are normally dispatched the same day. Orders placed after 15:00 CET, or on weekends and public holidays, will be dispatched on the next working day.
If you have an urgent order, please email us at info@signalsounds.eu before placing your order and we'll do our best to accommodate you.
Pre-orders
If a product is listed as a pre-order, it means we've ordered it from the supplier but it's not physically in stock yet. The product listing will include an estimated shipping date based on the best information we have from the supplier, but do bear in mind this is subject to change and is not a guaranteed date.
If you place an order containing a mixture of in-stock and pre-order items, we'll normally hold off on shipping anything until the pre-order item(s) have arrived, rather than splitting it into multiple shipments. If you need the in-stock items sooner, we'd recommend placing separate orders. As always, please get in touch at info@signalsounds.eu if you have questions.
Product Overview
Manufacturer's description
The P3 is a dual channel pedal interface. It can be used for pedal or line level in and out or as a guitar or bass input as the pedal in is a high-Z input that will not suck the life out of the tone of your instrument as low impedance inputs can do.
The module is designed to have more than 100kHz bandwidth in both directions to give you a very clean interface with in and out impedance to work well with pedals.
The two halves of the module are independent. You can use it as a dual mono or as a stereo interface.
Eurorack to pedal level is attenuating -18dB and pedal to Eurorack level is amplifying 18dB.
There is soft controlled symmetrical clipping in both directions through the module so if you are driving the inputs hard it will not sound harsh. You can use this as a creative effect.
The unit is AC coupled to be able to isolate your Eurorack from whatever you connect on the pedal side.
Eurorack to pedal
The Eurorack input has a symmetrical soft clipping at +/-10V.
A 5V signal (+14dBV) will give you a -4dBV signal out on the pedal out side (0,6V).
Pedal to Eurorack
The pedal input expects max -4dBV in to give a 5V signal out on the Eurorack side. However, the signal that comes from a pedal, the direct signal from a guitar or some line level equipment may have transients that are higher than this. This even if you are careful about the levels you put into it.
Because of this a limiter with a super soft long knee has been designed into the module so you don’t have to worry about getting harsh distortion on the transients.
The limiter just starts touching the signal slightly at -4dBV in and reaches full compression and symmetrical brick wall limiting with +6dBV in (2V). The output brick wall limits to +/-10V.
The limiter circuit is designed not to touch the signal at all under normal operations, it is there to add protection and maybe a bit of warmth when your signal is above -4dBV in. It can of cause be driven as hard as you like for creative purposes.
Bandwidth: More than 10 Hz to 100 kHz in both directions through the module.
Connect the power cable with the red stripe down towards the -12V marking. The unit is protected for reverse power.
Technical Specs
Shipping Details
How much is my shipping?
Shipping costs are calculated automatically at checkout. Simply add items to your cart and proceed to the checkout page, where you'll see the available shipping options and their prices. VAT at the applicable rate for your country will also be displayed at checkout.
European Union orders:
- Standard shipping is free on orders over €100. Express shipping is available on orders over €100, and free on orders over €400.
Poland orders:
- Standard shipping is free on orders over 250 PLN. Express shipping is free on orders over 500 PLN.
What about local taxes?
By default prices on the site include sales tax at 20%. The precise sales tax rate for your country will be calculated at checkout.
Do you ship to my country?
We ship to all EU member states from our warehouse in Warsaw, Poland. Add an item to your cart and enter your country and postcode to see the available shipping options and prices for your location. If you have any questions about shipping to your country, drop us an email at info@signalsounds.eu and we'll be happy to help.
Shipping methods
All EU orders are shipped via UPS. We offer two service levels:
- UPS Standard – our default shipping option. Delivery times vary by country (see estimated delivery times below).
- UPS Express Saver – next business day delivery to most EU destinations.
Each product page shows the estimated delivery time for your location, so you'll always know what to expect before you order.
Estimated delivery times (Standard shipping)
The times below are estimates in working days from dispatch, based on UPS Standard service. Express Saver delivers by the next business day to most destinations.
| Country | Estimated delivery (working days) |
|---|---|
| Austria | 2–3 |
| Belgium | 2 |
| Bulgaria | 4–5 |
| Croatia | 2–4 |
| Cyprus | 10 |
| Czechia | 2–3 |
| Denmark | 3 |
| Estonia | 2–3 |
| Finland | 3–5 |
| France | 2–4 |
| Germany | 2 |
| Greece | 5–7 |
| Hungary | 2–3 |
| Ireland | 4–6 |
| Italy | 3–5 |
| Latvia | 2–3 |
| Lithuania | 1–2 |
| Luxembourg | 2 |
| Malta | 5–7 |
| Netherlands | 2 |
| Poland | 1–2 |
| Portugal | 4–5 |
| Romania | 3–4 |
| Slovakia | 2–3 |
| Slovenia | 2–3 |
| Spain | 4 |
| Sweden | 3–5 |
These times are estimates and are not guaranteed. Delivery may occasionally take a little longer due to customs processing, local conditions, or carrier delays.
Dispatch times
Orders placed before 15:00 CET (Central European Time) on a working day are normally dispatched the same day. Orders placed after 15:00 CET, or on weekends and public holidays, will be dispatched on the next working day.
If you have an urgent order, please email us at info@signalsounds.eu before placing your order and we'll do our best to accommodate you.
Pre-orders
If a product is listed as a pre-order, it means we've ordered it from the supplier but it's not physically in stock yet. The product listing will include an estimated shipping date based on the best information we have from the supplier, but do bear in mind this is subject to change and is not a guaranteed date.
If you place an order containing a mixture of in-stock and pre-order items, we'll normally hold off on shipping anything until the pre-order item(s) have arrived, rather than splitting it into multiple shipments. If you need the in-stock items sooner, we'd recommend placing separate orders. As always, please get in touch at info@signalsounds.eu if you have questions.
