null
161027303247023

Synthesis Technology E580 Mini-Delay Eurorack FX Module

Synthesis Technology / 14 HP

€240,00
In stock
Synthesis Technology E580 Mini-Delay Eurorack FX Module main image
Synthesis Technology E580 Mini-Delay Eurorack FX Module main image
Adding to cart… The item has been added
Shipping info
The E580 emulates the classic sounds of digital, BBD (bucket brigade), and tape-based delays with four parameters under voltage control. This 14hp wide Eurorack module accepts either +/-12V standard power or +/-15V MOTM/power. Using a 40MHz DSP and 24-bit codec, the E580 recreates the pitch-shift modulation of BBDs, including the variable bandwidth and noise floor, without costly and scarce BBD ICs. In Tape Mode, wow & flutter, tape saturation and non-linear distortions emulate classic tape units without the bulk and maintenance. There are two simultaneous audio outputs: a straight delay and a variable tapped delay. The tap position is a percentage of the main delay time. This allows very short delays (<350μs) as well as long delays (750ms). Both tap position offset and main delay time are voltage-controlled over a -5v to +5v range.

Feedback is jumper-selectable from either the tapped position or the main delay. This flexibility can generate standard rhythmic delays (feedback from main delay) or a series of pre-delay reflections (tapped delay) which sound very different from each other.

SPECS

Height 3U (128.5mm)
Width 14hp (70.8mm)
Depth 32mm
Power 14-pin Eurorack (90mA from +12V, 20mA from -12V)
4-pin MOTM (90mA from +15V, 20mA from -15V)
CV input range 10Vpp (-5V to +5V), DC to 8KHz
Audio Input 10Vpp (-5V to +5V), 18KHz bandwidth (in Clean mode)
Audio Output 10Vpp (-5V to +5V), 5Hz to 18KHz
Delay Time Maximum of 780ms (0.78 seconds)
Jumper Options JP2: feedback will be taken from the Tap output (position 1-2) or the Delay output (position 2-3)

PANEL CONTROLS

Wet/Dry Sets the effects mix
Feedback Applies negative feedback (CCW) or positive feedback (CW). When placed in the center, there is zero feedback.
Tap Offset Sets the percentage of the Tap Out in relation to the Delay Time. For example, if the Delay Time is set to 100ms, the Tap is set from 0-100ms. The time resolution is very fine (over 7,000 independent positions) to allows very smooth modulation of the Tap position.
Delay Time Sets the delay time for the Delay Out. Note that since Tap Out is a percentage of Delay Time, if you change the Delay Time there is a corresponding change to the Tap Out delay time. The time ratio of Delay to Tap is constant however.
Mode switch Choose from one of three delay types

INPUTS AND OUTPUTS

Audio In Signal input, can be line level or modular synth level
Delay Out Delayed signal output
Tap Out Delayed output modified by Tap Offset value
Delay input CV input for modulating the Delay Time value
Mix input CV input for modulating the Wet/Dry value
Feedback input CV input for modulating the Feedback value
Offset input CV input for modulating the Tap Offset value
  • Width: 14HP
  • Depth: 32mm
  • Power: 90 mA +12V / 20 mA -12V / 0 mA 5V

How much is my shipping?

Shipping costs are calculated automatically at checkout. Simply add items to your cart and proceed to the checkout page, where you'll see the available shipping options and their prices. VAT at the applicable rate for your country will also be displayed at checkout.

European Union orders:

  • Standard shipping is free on orders over €100. Express shipping is available on orders over €100, and free on orders over €400.

Poland orders:

  • Standard shipping is free on orders over 250 PLN. Express shipping is free on orders over 500 PLN.

What about local taxes?

By default prices on the site include sales tax at 20%. The precise sales tax rate for your country will be calculated at checkout.

Do you ship to my country?

We ship to all EU member states from our warehouse in Warsaw, Poland. Add an item to your cart and enter your country and postcode to see the available shipping options and prices for your location. If you have any questions about shipping to your country, drop us an email at info@signalsounds.eu and we'll be happy to help.

Shipping methods

All EU orders are shipped via UPS. We offer two service levels:

  • UPS Standard – our default shipping option. Delivery times vary by country (see estimated delivery times below).
  • UPS Express Saver – next business day delivery to most EU destinations.

Each product page shows the estimated delivery time for your location, so you'll always know what to expect before you order.

Estimated delivery times (Standard shipping)

The times below are estimates in working days from dispatch, based on UPS Standard service. Express Saver delivers by the next business day to most destinations.

Country Estimated delivery (working days)
Austria2–3
Belgium2
Bulgaria4–5
Croatia2–4
Cyprus10
Czechia2–3
Denmark3
Estonia2–3
Finland3–5
France2–4
Germany2
Greece5–7
Hungary2–3
Ireland4–6
Italy3–5
Latvia2–3
Lithuania1–2
Luxembourg2
Malta5–7
Netherlands2
Poland1–2
Portugal4–5
Romania3–4
Slovakia2–3
Slovenia2–3
Spain4
Sweden3–5

These times are estimates and are not guaranteed. Delivery may occasionally take a little longer due to customs processing, local conditions, or carrier delays.

Dispatch times

Orders placed before 15:00 CET (Central European Time) on a working day are normally dispatched the same day. Orders placed after 15:00 CET, or on weekends and public holidays, will be dispatched on the next working day.

If you have an urgent order, please email us at info@signalsounds.eu before placing your order and we'll do our best to accommodate you.

Pre-orders

If a product is listed as a pre-order, it means we've ordered it from the supplier but it's not physically in stock yet. The product listing will include an estimated shipping date based on the best information we have from the supplier, but do bear in mind this is subject to change and is not a guaranteed date.

If you place an order containing a mixture of in-stock and pre-order items, we'll normally hold off on shipping anything until the pre-order item(s) have arrived, rather than splitting it into multiple shipments. If you need the in-stock items sooner, we'd recommend placing separate orders. As always, please get in touch at info@signalsounds.eu if you have questions.

Product Overview

The E580 emulates the classic sounds of digital, BBD (bucket brigade), and tape-based delays with four parameters under voltage control. This 14hp wide Eurorack module accepts either +/-12V standard power or +/-15V MOTM/power. Using a 40MHz DSP and 24-bit codec, the E580 recreates the pitch-shift modulation of BBDs, including the variable bandwidth and noise floor, without costly and scarce BBD ICs. In Tape Mode, wow & flutter, tape saturation and non-linear distortions emulate classic tape units without the bulk and maintenance. There are two simultaneous audio outputs: a straight delay and a variable tapped delay. The tap position is a percentage of the main delay time. This allows very short delays (<350μs) as well as long delays (750ms). Both tap position offset and main delay time are voltage-controlled over a -5v to +5v range.

Feedback is jumper-selectable from either the tapped position or the main delay. This flexibility can generate standard rhythmic delays (feedback from main delay) or a series of pre-delay reflections (tapped delay) which sound very different from each other.

SPECS

Height 3U (128.5mm)
Width 14hp (70.8mm)
Depth 32mm
Power 14-pin Eurorack (90mA from +12V, 20mA from -12V)
4-pin MOTM (90mA from +15V, 20mA from -15V)
CV input range 10Vpp (-5V to +5V), DC to 8KHz
Audio Input 10Vpp (-5V to +5V), 18KHz bandwidth (in Clean mode)
Audio Output 10Vpp (-5V to +5V), 5Hz to 18KHz
Delay Time Maximum of 780ms (0.78 seconds)
Jumper Options JP2: feedback will be taken from the Tap output (position 1-2) or the Delay output (position 2-3)

PANEL CONTROLS

Wet/Dry Sets the effects mix
Feedback Applies negative feedback (CCW) or positive feedback (CW). When placed in the center, there is zero feedback.
Tap Offset Sets the percentage of the Tap Out in relation to the Delay Time. For example, if the Delay Time is set to 100ms, the Tap is set from 0-100ms. The time resolution is very fine (over 7,000 independent positions) to allows very smooth modulation of the Tap position.
Delay Time Sets the delay time for the Delay Out. Note that since Tap Out is a percentage of Delay Time, if you change the Delay Time there is a corresponding change to the Tap Out delay time. The time ratio of Delay to Tap is constant however.
Mode switch Choose from one of three delay types

INPUTS AND OUTPUTS

Audio In Signal input, can be line level or modular synth level
Delay Out Delayed signal output
Tap Out Delayed output modified by Tap Offset value
Delay input CV input for modulating the Delay Time value
Mix input CV input for modulating the Wet/Dry value
Feedback input CV input for modulating the Feedback value
Offset input CV input for modulating the Tap Offset value

Technical Specs

  • Width: 14HP
  • Depth: 32mm
  • Power: 90 mA +12V / 20 mA -12V / 0 mA 5V

Shipping Details

How much is my shipping?

Shipping costs are calculated automatically at checkout. Simply add items to your cart and proceed to the checkout page, where you'll see the available shipping options and their prices. VAT at the applicable rate for your country will also be displayed at checkout.

European Union orders:

  • Standard shipping is free on orders over €100. Express shipping is available on orders over €100, and free on orders over €400.

Poland orders:

  • Standard shipping is free on orders over 250 PLN. Express shipping is free on orders over 500 PLN.

What about local taxes?

By default prices on the site include sales tax at 20%. The precise sales tax rate for your country will be calculated at checkout.

Do you ship to my country?

We ship to all EU member states from our warehouse in Warsaw, Poland. Add an item to your cart and enter your country and postcode to see the available shipping options and prices for your location. If you have any questions about shipping to your country, drop us an email at info@signalsounds.eu and we'll be happy to help.

Shipping methods

All EU orders are shipped via UPS. We offer two service levels:

  • UPS Standard – our default shipping option. Delivery times vary by country (see estimated delivery times below).
  • UPS Express Saver – next business day delivery to most EU destinations.

Each product page shows the estimated delivery time for your location, so you'll always know what to expect before you order.

Estimated delivery times (Standard shipping)

The times below are estimates in working days from dispatch, based on UPS Standard service. Express Saver delivers by the next business day to most destinations.

Country Estimated delivery (working days)
Austria2–3
Belgium2
Bulgaria4–5
Croatia2–4
Cyprus10
Czechia2–3
Denmark3
Estonia2–3
Finland3–5
France2–4
Germany2
Greece5–7
Hungary2–3
Ireland4–6
Italy3–5
Latvia2–3
Lithuania1–2
Luxembourg2
Malta5–7
Netherlands2
Poland1–2
Portugal4–5
Romania3–4
Slovakia2–3
Slovenia2–3
Spain4
Sweden3–5

These times are estimates and are not guaranteed. Delivery may occasionally take a little longer due to customs processing, local conditions, or carrier delays.

Dispatch times

Orders placed before 15:00 CET (Central European Time) on a working day are normally dispatched the same day. Orders placed after 15:00 CET, or on weekends and public holidays, will be dispatched on the next working day.

If you have an urgent order, please email us at info@signalsounds.eu before placing your order and we'll do our best to accommodate you.

Pre-orders

If a product is listed as a pre-order, it means we've ordered it from the supplier but it's not physically in stock yet. The product listing will include an estimated shipping date based on the best information we have from the supplier, but do bear in mind this is subject to change and is not a guaranteed date.

If you place an order containing a mixture of in-stock and pre-order items, we'll normally hold off on shipping anything until the pre-order item(s) have arrived, rather than splitting it into multiple shipments. If you need the in-stock items sooner, we'd recommend placing separate orders. As always, please get in touch at info@signalsounds.eu if you have questions.

Explore more