This is our long due Eurorack Clock module, featuring multiple sections for a combined total of 8 independent trigger outputs.
Introducing standard time signature musical notation along with the possibility to generate syncopation, irregular tempo ratios and phasing all at once in a single straight forward unit.
We started by programming an extremelly stable digital clock with over time drift compensation and adjustable to any Beat per Minute [BPM] up to 1 decimal case (from 0.1 to 250.0 BPM). Also implemented a Tap Tempo button and Pingable input for syncing to external clocks using either Soft or Hard [SYNC] modes.
The Time Signature X/Y section defined as [Beats Per Bar] / [Beat Unit] and generating 4 outputs triggering at every: Beat, Bar, Odd Beat (1,3,5...) and Even Beat (2,4,6...).
A [PAUSE] button sets the Pause/Resume state of the clock also allowing different sync methods on Resume.
A [RESET] button resets either each or both the Main and Phasing Clocks
A Divider section can be set to any beat division in Linear (3,4,5,6,7,8,9,10) or Exponential mode (1,2,4,8,16,32,64,128)
The Phasing section features a totally independent clock that can run in two modes:
[TEMPO] running at a slower/faster bpm phasing in and out of tempo against the main clock.
[OFFSET] running at the same bpm but offsetted/delayed against the main clock generating a steady syncopated beat.
A Tuplet section allows the generation of Triplets, Quintuplets, Septuplets and Ninelets with adjustable [LENGTH] or Span of the tuplet to any number of Beats from 1 to 16.
4 Modes allow different [TRIGGER] and [MUTE] functionalities: they can run in a loop or one shot mode, [TRIGGER] always triggers/resets the Tuplet and [MUTE] can be set to Gate On or Gate Off. Tuplets always output irregular divisions of the Beat and allow Polybeat generation.
A Swing Delay section allow to delay 1 Beat at [Every X Beats]. The [Delay] knob sets the delay in a fraction of 1 Beat, this section also allows the generation of syncopated beats.
More specific settings can be changed in the [SHOW/MENU], menu functions are labeled in gold.
All sections feature they’re own monitor LEDs.
By default Display shows the current Time Signature status.
Pressing the [SHOW/MENU] button sequentially will display each sections settings.
After 3 seconds it automatically returns to default Time Signature status.
All settings can be saved to a single memory slot, upon startup the memory state will be automatically loaded.
All Knobs and Push-Buttons have their own CV/Trigger inputs except the [BPM] encoder and [SHOW/MENU] button.
Make sure to read the ADDAC403 User's Guide for further indepth descriptions.
- Width: 16HP
- Depth: 40mm
- Power: 140 mA +12V / 40 mA -12V
How much is my shipping?
Shipping costs are calculated automatically at checkout. Simply add items to your cart and proceed to the checkout page, where you'll see the available shipping options and their prices. VAT at the applicable rate for your country will also be displayed at checkout.
European Union orders:
- Standard shipping is free on orders over €100. Express shipping is available on orders over €100, and free on orders over €400.
Poland orders:
- Standard shipping is free on orders over 250 PLN. Express shipping is free on orders over 500 PLN.
What about local taxes?
By default prices on the site include sales tax at 20%. The precise sales tax rate for your country will be calculated at checkout.
Do you ship to my country?
We ship to all EU member states from our warehouse in Warsaw, Poland. Add an item to your cart and enter your country and postcode to see the available shipping options and prices for your location. If you have any questions about shipping to your country, drop us an email at info@signalsounds.eu and we'll be happy to help.
Shipping methods
All EU orders are shipped via UPS. We offer two service levels:
- UPS Standard – our default shipping option. Delivery times vary by country (see estimated delivery times below).
- UPS Express Saver – next business day delivery to most EU destinations.
Each product page shows the estimated delivery time for your location, so you'll always know what to expect before you order.
Estimated delivery times (Standard shipping)
The times below are estimates in working days from dispatch, based on UPS Standard service. Express Saver delivers by the next business day to most destinations.
| Country | Estimated delivery (working days) |
|---|---|
| Austria | 2–3 |
| Belgium | 2 |
| Bulgaria | 4–5 |
| Croatia | 2–4 |
| Cyprus | 10 |
| Czechia | 2–3 |
| Denmark | 3 |
| Estonia | 2–3 |
| Finland | 3–5 |
| France | 2–4 |
| Germany | 2 |
| Greece | 5–7 |
| Hungary | 2–3 |
| Ireland | 4–6 |
| Italy | 3–5 |
| Latvia | 2–3 |
| Lithuania | 1–2 |
| Luxembourg | 2 |
| Malta | 5–7 |
| Netherlands | 2 |
| Poland | 1–2 |
| Portugal | 4–5 |
| Romania | 3–4 |
| Slovakia | 2–3 |
| Slovenia | 2–3 |
| Spain | 4 |
| Sweden | 3–5 |
These times are estimates and are not guaranteed. Delivery may occasionally take a little longer due to customs processing, local conditions, or carrier delays.
Dispatch times
Orders placed before 15:00 CET (Central European Time) on a working day are normally dispatched the same day. Orders placed after 15:00 CET, or on weekends and public holidays, will be dispatched on the next working day.
If you have an urgent order, please email us at info@signalsounds.eu before placing your order and we'll do our best to accommodate you.
Pre-orders
If a product is listed as a pre-order, it means we've ordered it from the supplier but it's not physically in stock yet. The product listing will include an estimated shipping date based on the best information we have from the supplier, but do bear in mind this is subject to change and is not a guaranteed date.
If you place an order containing a mixture of in-stock and pre-order items, we'll normally hold off on shipping anything until the pre-order item(s) have arrived, rather than splitting it into multiple shipments. If you need the in-stock items sooner, we'd recommend placing separate orders. As always, please get in touch at info@signalsounds.eu if you have questions.
Product Overview
This is our long due Eurorack Clock module, featuring multiple sections for a combined total of 8 independent trigger outputs.
Introducing standard time signature musical notation along with the possibility to generate syncopation, irregular tempo ratios and phasing all at once in a single straight forward unit.
We started by programming an extremelly stable digital clock with over time drift compensation and adjustable to any Beat per Minute [BPM] up to 1 decimal case (from 0.1 to 250.0 BPM). Also implemented a Tap Tempo button and Pingable input for syncing to external clocks using either Soft or Hard [SYNC] modes.
The Time Signature X/Y section defined as [Beats Per Bar] / [Beat Unit] and generating 4 outputs triggering at every: Beat, Bar, Odd Beat (1,3,5...) and Even Beat (2,4,6...).
A [PAUSE] button sets the Pause/Resume state of the clock also allowing different sync methods on Resume.
A [RESET] button resets either each or both the Main and Phasing Clocks
A Divider section can be set to any beat division in Linear (3,4,5,6,7,8,9,10) or Exponential mode (1,2,4,8,16,32,64,128)
The Phasing section features a totally independent clock that can run in two modes:
[TEMPO] running at a slower/faster bpm phasing in and out of tempo against the main clock.
[OFFSET] running at the same bpm but offsetted/delayed against the main clock generating a steady syncopated beat.
A Tuplet section allows the generation of Triplets, Quintuplets, Septuplets and Ninelets with adjustable [LENGTH] or Span of the tuplet to any number of Beats from 1 to 16.
4 Modes allow different [TRIGGER] and [MUTE] functionalities: they can run in a loop or one shot mode, [TRIGGER] always triggers/resets the Tuplet and [MUTE] can be set to Gate On or Gate Off. Tuplets always output irregular divisions of the Beat and allow Polybeat generation.
A Swing Delay section allow to delay 1 Beat at [Every X Beats]. The [Delay] knob sets the delay in a fraction of 1 Beat, this section also allows the generation of syncopated beats.
More specific settings can be changed in the [SHOW/MENU], menu functions are labeled in gold.
All sections feature they’re own monitor LEDs.
By default Display shows the current Time Signature status.
Pressing the [SHOW/MENU] button sequentially will display each sections settings.
After 3 seconds it automatically returns to default Time Signature status.
All settings can be saved to a single memory slot, upon startup the memory state will be automatically loaded.
All Knobs and Push-Buttons have their own CV/Trigger inputs except the [BPM] encoder and [SHOW/MENU] button.
Make sure to read the ADDAC403 User's Guide for further indepth descriptions.
Technical Specs
Shipping Details
How much is my shipping?
Shipping costs are calculated automatically at checkout. Simply add items to your cart and proceed to the checkout page, where you'll see the available shipping options and their prices. VAT at the applicable rate for your country will also be displayed at checkout.
European Union orders:
- Standard shipping is free on orders over €100. Express shipping is available on orders over €100, and free on orders over €400.
Poland orders:
- Standard shipping is free on orders over 250 PLN. Express shipping is free on orders over 500 PLN.
What about local taxes?
By default prices on the site include sales tax at 20%. The precise sales tax rate for your country will be calculated at checkout.
Do you ship to my country?
We ship to all EU member states from our warehouse in Warsaw, Poland. Add an item to your cart and enter your country and postcode to see the available shipping options and prices for your location. If you have any questions about shipping to your country, drop us an email at info@signalsounds.eu and we'll be happy to help.
Shipping methods
All EU orders are shipped via UPS. We offer two service levels:
- UPS Standard – our default shipping option. Delivery times vary by country (see estimated delivery times below).
- UPS Express Saver – next business day delivery to most EU destinations.
Each product page shows the estimated delivery time for your location, so you'll always know what to expect before you order.
Estimated delivery times (Standard shipping)
The times below are estimates in working days from dispatch, based on UPS Standard service. Express Saver delivers by the next business day to most destinations.
| Country | Estimated delivery (working days) |
|---|---|
| Austria | 2–3 |
| Belgium | 2 |
| Bulgaria | 4–5 |
| Croatia | 2–4 |
| Cyprus | 10 |
| Czechia | 2–3 |
| Denmark | 3 |
| Estonia | 2–3 |
| Finland | 3–5 |
| France | 2–4 |
| Germany | 2 |
| Greece | 5–7 |
| Hungary | 2–3 |
| Ireland | 4–6 |
| Italy | 3–5 |
| Latvia | 2–3 |
| Lithuania | 1–2 |
| Luxembourg | 2 |
| Malta | 5–7 |
| Netherlands | 2 |
| Poland | 1–2 |
| Portugal | 4–5 |
| Romania | 3–4 |
| Slovakia | 2–3 |
| Slovenia | 2–3 |
| Spain | 4 |
| Sweden | 3–5 |
These times are estimates and are not guaranteed. Delivery may occasionally take a little longer due to customs processing, local conditions, or carrier delays.
Dispatch times
Orders placed before 15:00 CET (Central European Time) on a working day are normally dispatched the same day. Orders placed after 15:00 CET, or on weekends and public holidays, will be dispatched on the next working day.
If you have an urgent order, please email us at info@signalsounds.eu before placing your order and we'll do our best to accommodate you.
Pre-orders
If a product is listed as a pre-order, it means we've ordered it from the supplier but it's not physically in stock yet. The product listing will include an estimated shipping date based on the best information we have from the supplier, but do bear in mind this is subject to change and is not a guaranteed date.
If you place an order containing a mixture of in-stock and pre-order items, we'll normally hold off on shipping anything until the pre-order item(s) have arrived, rather than splitting it into multiple shipments. If you need the in-stock items sooner, we'd recommend placing separate orders. As always, please get in touch at info@signalsounds.eu if you have questions.
