null
KOMA08

KOMA Elektronik Field Kit Sensor Pack A

KOMA Elektronik / HP

332,00zł
In stock
KOMA Elektronik Field Kit Sensor Pack A main image
KOMA Elektronik Field Kit Sensor Pack A main image
Adding to cart… The item has been added
Shipping info

Manufacturer's description

KOMA Elektronik’s sensors offer a wide range of creative possibilities for interacting with the environment that surround yourself. Ambient signals such as light or heat can now be part of your live or studio setup. Physical interaction sensors create a more direct connection between you and your setup. Generative sensors help you create patterns and rhythms on the go.

The Field Kit Sensor Pack A consists of 5 sensors and 2 cables to connect.

Compatible with the Field Kit.

Button / Jack

This is rather a utility tool than an actual sensor. It allows you to either use a pushbutton or any CV-Signal (0- 5V) as a signal source. You can select to either use the button or any signal connected to the jack input with the jumper located right next to pin-header. The voltage present at the output upon a button press can be selected with the two jumpers next to the button. The button and jack can be used with both the ANALOG IN and the DIGITAL IN of the Field Kit’s Sensor Interface.

Electret Microphone

The electret microphone provides a simple solution to use your surroundings as a sample source. The board features a little trimmer to adjust the gain of the microphone pre-amplifier. Use a little screwdriver to adjust the gain according to the printing on the sensor board. It‘s preferable to adjust the signal level with the trimmer first and only use the level pot of the analog signal interface as a second adjustment stage. The electret microphone has an omnidirectional directivity and is capable of capturing the whole frequency spectrum from 20 to 20000 Hz. The electret microphone is best be used with the ANALOG IN of the Field Kit’s Sensor Interface.

Light Sensor

The light sensor will change the output voltage depending on the light intensity. The spectral sensitivity is similar to the human eye, covering the full spectra of visible light, with a peak at 570nm (green/yellow). The change of the voltage according to the light intensity can be set with the three jumpers on the board. Set those jumpers according to printing on the board. The light sensor can be used with the ANALOG IN and the DIGITAL IN of the Field Kit’s Sensor Interface.

Temperature Sensor

The temperature board features two output modes: a continuous CV or a trigger.

CV Mode: The board will output a continuous voltage in range 0 – 5 V depending on the measured temperature and scaled to the set lower and upper temperature limit.

Trigger Mode: The board will generate a trigger whenever the measured temperature rises above the set upper limit temperature. LED 1 will blink whenever a trigger is generated. The sensor covers a temperature range from -55°C to +125°C.

Ball Switch

The ball switch consists of a little bouncy ball jumping around in a container connecting two contacts and thus acts like a switch. In contrary to a normal push button, which has very well defined states, the switching of a ball switch is more similar to a percussion shaker. There are two resting-positions which define a certain state of the switch: the board is lying flat on the table with its bottom facing the table: the switch is open the board is lying flat on the table with its top facing the table: the switch is closed. The ball switch can be used with the ANALOG IN and the DIGITAL IN of the Field Kit’s Sensor Interface.

  • Dimensions: 13 x 11 x 9 cm
  • Weight: 0.1 kg

How much is my shipping?

Shipping costs are calculated automatically at checkout. Simply add items to your cart and proceed to the checkout page, where you'll see the available shipping options and their prices. VAT at the applicable rate for your country will also be displayed at checkout.

European Union orders:

  • Standard shipping is free on orders over €149. Express shipping is available on orders over €100, and free on orders over €400.
  • Free deliveryn and express delivery are not available to islands and remote areas including but not limited to Cyprus, Malta, Ceuta and more throughout the European Union. Add products to your cart and enter your address to confirm yoru shipping charge.

Poland orders:

  • Standard shipping is free on orders over 250 PLN. Express shipping is free on orders over 500 PLN.

What about local taxes?

By default prices on the site include sales tax at 20%. The precise sales tax rate for your country will be calculated at checkout.

Do you ship to my country?

We ship to all EU member states from our warehouse in Warsaw, Poland. Add an item to your cart and enter your country and postcode to see the available shipping options and prices for your location. If you have any questions about shipping to your country, drop us an email at info@signalsounds.eu and we'll be happy to help.

Shipping methods

All EU orders are shipped via UPS. We offer two service levels:

  • UPS Standard – our default shipping option. Delivery times vary by country (see estimated delivery times below).
  • UPS Express Saver – next business day delivery to most EU destinations.

Each product page shows the estimated delivery time for your location, so you'll always know what to expect before you order.

Estimated delivery times (Standard shipping)

The times below are estimates in working days from dispatch, based on UPS Standard service. Express Saver delivers by the next business day to most destinations.

Country Estimated delivery (working days)
Austria2–3
Belgium2
Bulgaria4–5
Croatia2–4
Cyprus10
Czechia2–3
Denmark3
Estonia2–3
Finland3–5
France2–4
Germany2
Greece5–7
Hungary2–3
Ireland4–6
Italy3–5
Latvia2–3
Lithuania1–2
Luxembourg2
Malta5–7
Netherlands2
Poland1–2
Portugal4–5
Romania3–4
Slovakia2–3
Slovenia2–3
Spain4
Sweden3–5

These times are estimates and are not guaranteed. Delivery may occasionally take a little longer due to customs processing, local conditions, or carrier delays.

Dispatch times

Orders placed before 14:45 CET (Central European Time) on a working day are normally dispatched the same day. Orders placed after 14:45 CET, or on weekends and public holidays, will be dispatched on the next working day.

If you have an urgent order, please email us at info@signalsounds.eu before placing your order and we'll do our best to accommodate you.

Pre-orders

If a product is listed as a pre-order, it means we've ordered it from the supplier but it's not physically in stock yet. The product listing will include an estimated shipping date based on the best information we have from the supplier, but do bear in mind this is subject to change and is not a guaranteed date.

If you place an order containing a mixture of in-stock and pre-order items, we'll normally hold off on shipping anything until the pre-order item(s) have arrived, rather than splitting it into multiple shipments. If you need the in-stock items sooner, we'd recommend placing separate orders. As always, please get in touch at info@signalsounds.eu if you have questions.

Product Overview

Manufacturer's description

KOMA Elektronik’s sensors offer a wide range of creative possibilities for interacting with the environment that surround yourself. Ambient signals such as light or heat can now be part of your live or studio setup. Physical interaction sensors create a more direct connection between you and your setup. Generative sensors help you create patterns and rhythms on the go.

The Field Kit Sensor Pack A consists of 5 sensors and 2 cables to connect.

Compatible with the Field Kit.

Button / Jack

This is rather a utility tool than an actual sensor. It allows you to either use a pushbutton or any CV-Signal (0- 5V) as a signal source. You can select to either use the button or any signal connected to the jack input with the jumper located right next to pin-header. The voltage present at the output upon a button press can be selected with the two jumpers next to the button. The button and jack can be used with both the ANALOG IN and the DIGITAL IN of the Field Kit’s Sensor Interface.

Electret Microphone

The electret microphone provides a simple solution to use your surroundings as a sample source. The board features a little trimmer to adjust the gain of the microphone pre-amplifier. Use a little screwdriver to adjust the gain according to the printing on the sensor board. It‘s preferable to adjust the signal level with the trimmer first and only use the level pot of the analog signal interface as a second adjustment stage. The electret microphone has an omnidirectional directivity and is capable of capturing the whole frequency spectrum from 20 to 20000 Hz. The electret microphone is best be used with the ANALOG IN of the Field Kit’s Sensor Interface.

Light Sensor

The light sensor will change the output voltage depending on the light intensity. The spectral sensitivity is similar to the human eye, covering the full spectra of visible light, with a peak at 570nm (green/yellow). The change of the voltage according to the light intensity can be set with the three jumpers on the board. Set those jumpers according to printing on the board. The light sensor can be used with the ANALOG IN and the DIGITAL IN of the Field Kit’s Sensor Interface.

Temperature Sensor

The temperature board features two output modes: a continuous CV or a trigger.

CV Mode: The board will output a continuous voltage in range 0 – 5 V depending on the measured temperature and scaled to the set lower and upper temperature limit.

Trigger Mode: The board will generate a trigger whenever the measured temperature rises above the set upper limit temperature. LED 1 will blink whenever a trigger is generated. The sensor covers a temperature range from -55°C to +125°C.

Ball Switch

The ball switch consists of a little bouncy ball jumping around in a container connecting two contacts and thus acts like a switch. In contrary to a normal push button, which has very well defined states, the switching of a ball switch is more similar to a percussion shaker. There are two resting-positions which define a certain state of the switch: the board is lying flat on the table with its bottom facing the table: the switch is open the board is lying flat on the table with its top facing the table: the switch is closed. The ball switch can be used with the ANALOG IN and the DIGITAL IN of the Field Kit’s Sensor Interface.

Technical Specs

  • Dimensions: 13 x 11 x 9 cm
  • Weight: 0.1 kg

Shipping Details

How much is my shipping?

Shipping costs are calculated automatically at checkout. Simply add items to your cart and proceed to the checkout page, where you'll see the available shipping options and their prices. VAT at the applicable rate for your country will also be displayed at checkout.

European Union orders:

  • Standard shipping is free on orders over €149. Express shipping is available on orders over €100, and free on orders over €400.
  • Free deliveryn and express delivery are not available to islands and remote areas including but not limited to Cyprus, Malta, Ceuta and more throughout the European Union. Add products to your cart and enter your address to confirm yoru shipping charge.

Poland orders:

  • Standard shipping is free on orders over 250 PLN. Express shipping is free on orders over 500 PLN.

What about local taxes?

By default prices on the site include sales tax at 20%. The precise sales tax rate for your country will be calculated at checkout.

Do you ship to my country?

We ship to all EU member states from our warehouse in Warsaw, Poland. Add an item to your cart and enter your country and postcode to see the available shipping options and prices for your location. If you have any questions about shipping to your country, drop us an email at info@signalsounds.eu and we'll be happy to help.

Shipping methods

All EU orders are shipped via UPS. We offer two service levels:

  • UPS Standard – our default shipping option. Delivery times vary by country (see estimated delivery times below).
  • UPS Express Saver – next business day delivery to most EU destinations.

Each product page shows the estimated delivery time for your location, so you'll always know what to expect before you order.

Estimated delivery times (Standard shipping)

The times below are estimates in working days from dispatch, based on UPS Standard service. Express Saver delivers by the next business day to most destinations.

Country Estimated delivery (working days)
Austria2–3
Belgium2
Bulgaria4–5
Croatia2–4
Cyprus10
Czechia2–3
Denmark3
Estonia2–3
Finland3–5
France2–4
Germany2
Greece5–7
Hungary2–3
Ireland4–6
Italy3–5
Latvia2–3
Lithuania1–2
Luxembourg2
Malta5–7
Netherlands2
Poland1–2
Portugal4–5
Romania3–4
Slovakia2–3
Slovenia2–3
Spain4
Sweden3–5

These times are estimates and are not guaranteed. Delivery may occasionally take a little longer due to customs processing, local conditions, or carrier delays.

Dispatch times

Orders placed before 14:45 CET (Central European Time) on a working day are normally dispatched the same day. Orders placed after 14:45 CET, or on weekends and public holidays, will be dispatched on the next working day.

If you have an urgent order, please email us at info@signalsounds.eu before placing your order and we'll do our best to accommodate you.

Pre-orders

If a product is listed as a pre-order, it means we've ordered it from the supplier but it's not physically in stock yet. The product listing will include an estimated shipping date based on the best information we have from the supplier, but do bear in mind this is subject to change and is not a guaranteed date.

If you place an order containing a mixture of in-stock and pre-order items, we'll normally hold off on shipping anything until the pre-order item(s) have arrived, rather than splitting it into multiple shipments. If you need the in-stock items sooner, we'd recommend placing separate orders. As always, please get in touch at info@signalsounds.eu if you have questions.

Explore more