Manufacturer's description
Bus Rider is a stereo multiband EQ/dynamics processor + lookahead limiter designed for on the fly mastering at the end of your signal chain. It's also useful for submix and individual channel processing. The Isolator EQ is a great performance tool beyond fitting your mix to the room/sound system you are playing on.
EQ, multiband compression, and limiting, all in one module
At the top of the module, a three way toggle switch lets you choose between pages of controls. The SHIFT button gives access to secondary functions, allowing you to change the "set and forget" set of features with ease.
ISO: The left position gives you control of 3 band isolator eq with +12dB boost and total cut (-∞) for each band. The shift functions let you change the low and high band crossover points.
DYN: The center position enables the interface for the multiband compressor with controls for threshold and ratio on each band.
LIMIT: With the switch to the right, the interface is in control over a lookahead limiter with controls for input gain, ceiling, release time, and saturation.
Compact interface with thoughtful design
Bus Rider has an intuitive layout and interface. The LEDs will match the color of the labels on the panel, reminding you which set of controls you are currently using. The LED bar on the right acts as an overall VU meter, showing gain reduction in the limiter section, and switches to display the value of whichever knob is currently being turned.
All sections of the module are active at all times, each can be made inactive by setting the knobs appropriately. The entire module can be bypassed with the I/O button. The module's audio signal path begins at the crossovers, then runs through the multiband compressor, eq, and is recombined before going into the lookahead limiter.
BUTTONS AND SWITCHES
- I/O: Bypasses all sections of the module
- LINK : Links the limiter's detectors, driving both channels from the left input so they limit together and hold the stereo image. Unlinked, each side limits on its own signa.
- PRESET: 9 user settable / recallable presets.
- SHIFT: Hold and press buttons or turn knobs for shift functionality.
- EQ, DYN, LIMIT: Switches between the three pages of controls.
ISO EQ
- HIGH: Level control for the high band
- XOVER: Crossover frequency for the high band
- MID: Level control for the mid band
- LOW: Level control for the low band
- XOVER: Crossover frequency for the low band
DYN
- H: THLD: Threshold control for the high band
- RATIO: Ratio control for the high band
- M: THLD: Threshold control for the mid band
- RATIO: Ratio control for the mid band
- L: THLD: Threshold control for the low band
- RATIO: Ratio control for the low band
LIMIT
- GAIN: Input gain to push your signal into the limiter ceiling
- CEIL: Adjusts the limiter ceiling
- RELEASE: Adjusts the release time for the limiter. Attack time is determined by the lookahead buffer (1.5 ms).
- LINK: Stereo Linking on or off for the detector.
- SAT: Adjusts the input gain into the saturation (mid-high bands only)
- L SAT: Adds the low band information into the saturator
JACKS
- LOW CUT: CV input over the low band ISO EQ level to cut the lows
- CV: Assignable CV input
- IN L / IN R: Stereo input
- OUT L / OUT R: Stereo output
How much is my shipping?
Shipping costs are calculated automatically at checkout. Simply add items to your cart and proceed to the checkout page, where you'll see the available shipping options and their prices. VAT at the applicable rate for your country will also be displayed at checkout.
European Union orders:
- Standard shipping is free on orders over €100. Express shipping is available on orders over €100, and free on orders over €400.
- Free deliveryn and express delivery are not available to islands and remote areas including but not limited to Cyprus, Malta, Ceuta and more throughout the European Union. Add products to your cart and enter your address to confirm yoru shipping charge.
Poland orders:
- Standard shipping is free on orders over 250 PLN. Express shipping is free on orders over 500 PLN.
What about local taxes?
By default prices on the site include sales tax at 20%. The precise sales tax rate for your country will be calculated at checkout.
Do you ship to my country?
We ship to all EU member states from our warehouse in Warsaw, Poland. Add an item to your cart and enter your country and postcode to see the available shipping options and prices for your location. If you have any questions about shipping to your country, drop us an email at info@signalsounds.eu and we'll be happy to help.
Shipping methods
All EU orders are shipped via UPS. We offer two service levels:
- UPS Standard – our default shipping option. Delivery times vary by country (see estimated delivery times below).
- UPS Express Saver – next business day delivery to most EU destinations.
Each product page shows the estimated delivery time for your location, so you'll always know what to expect before you order.
Estimated delivery times (Standard shipping)
The times below are estimates in working days from dispatch, based on UPS Standard service. Express Saver delivers by the next business day to most destinations.
| Country | Estimated delivery (working days) |
|---|---|
| Austria | 2–3 |
| Belgium | 2 |
| Bulgaria | 4–5 |
| Croatia | 2–4 |
| Cyprus | 10 |
| Czechia | 2–3 |
| Denmark | 3 |
| Estonia | 2–3 |
| Finland | 3–5 |
| France | 2–4 |
| Germany | 2 |
| Greece | 5–7 |
| Hungary | 2–3 |
| Ireland | 4–6 |
| Italy | 3–5 |
| Latvia | 2–3 |
| Lithuania | 1–2 |
| Luxembourg | 2 |
| Malta | 5–7 |
| Netherlands | 2 |
| Poland | 1–2 |
| Portugal | 4–5 |
| Romania | 3–4 |
| Slovakia | 2–3 |
| Slovenia | 2–3 |
| Spain | 4 |
| Sweden | 3–5 |
These times are estimates and are not guaranteed. Delivery may occasionally take a little longer due to customs processing, local conditions, or carrier delays.
Dispatch times
Orders placed before 15:00 CET (Central European Time) on a working day are normally dispatched the same day. Orders placed after 15:00 CET, or on weekends and public holidays, will be dispatched on the next working day.
If you have an urgent order, please email us at info@signalsounds.eu before placing your order and we'll do our best to accommodate you.
Pre-orders
If a product is listed as a pre-order, it means we've ordered it from the supplier but it's not physically in stock yet. The product listing will include an estimated shipping date based on the best information we have from the supplier, but do bear in mind this is subject to change and is not a guaranteed date.
If you place an order containing a mixture of in-stock and pre-order items, we'll normally hold off on shipping anything until the pre-order item(s) have arrived, rather than splitting it into multiple shipments. If you need the in-stock items sooner, we'd recommend placing separate orders. As always, please get in touch at info@signalsounds.eu if you have questions.
Product Overview
Manufacturer's description
Bus Rider is a stereo multiband EQ/dynamics processor + lookahead limiter designed for on the fly mastering at the end of your signal chain. It's also useful for submix and individual channel processing. The Isolator EQ is a great performance tool beyond fitting your mix to the room/sound system you are playing on.
EQ, multiband compression, and limiting, all in one module
At the top of the module, a three way toggle switch lets you choose between pages of controls. The SHIFT button gives access to secondary functions, allowing you to change the "set and forget" set of features with ease.
ISO: The left position gives you control of 3 band isolator eq with +12dB boost and total cut (-∞) for each band. The shift functions let you change the low and high band crossover points.
DYN: The center position enables the interface for the multiband compressor with controls for threshold and ratio on each band.
LIMIT: With the switch to the right, the interface is in control over a lookahead limiter with controls for input gain, ceiling, release time, and saturation.
Compact interface with thoughtful design
Bus Rider has an intuitive layout and interface. The LEDs will match the color of the labels on the panel, reminding you which set of controls you are currently using. The LED bar on the right acts as an overall VU meter, showing gain reduction in the limiter section, and switches to display the value of whichever knob is currently being turned.
All sections of the module are active at all times, each can be made inactive by setting the knobs appropriately. The entire module can be bypassed with the I/O button. The module's audio signal path begins at the crossovers, then runs through the multiband compressor, eq, and is recombined before going into the lookahead limiter.
BUTTONS AND SWITCHES
- I/O: Bypasses all sections of the module
- LINK : Links the limiter's detectors, driving both channels from the left input so they limit together and hold the stereo image. Unlinked, each side limits on its own signa.
- PRESET: 9 user settable / recallable presets.
- SHIFT: Hold and press buttons or turn knobs for shift functionality.
- EQ, DYN, LIMIT: Switches between the three pages of controls.
ISO EQ
- HIGH: Level control for the high band
- XOVER: Crossover frequency for the high band
- MID: Level control for the mid band
- LOW: Level control for the low band
- XOVER: Crossover frequency for the low band
DYN
- H: THLD: Threshold control for the high band
- RATIO: Ratio control for the high band
- M: THLD: Threshold control for the mid band
- RATIO: Ratio control for the mid band
- L: THLD: Threshold control for the low band
- RATIO: Ratio control for the low band
LIMIT
- GAIN: Input gain to push your signal into the limiter ceiling
- CEIL: Adjusts the limiter ceiling
- RELEASE: Adjusts the release time for the limiter. Attack time is determined by the lookahead buffer (1.5 ms).
- LINK: Stereo Linking on or off for the detector.
- SAT: Adjusts the input gain into the saturation (mid-high bands only)
- L SAT: Adds the low band information into the saturator
JACKS
- LOW CUT: CV input over the low band ISO EQ level to cut the lows
- CV: Assignable CV input
- IN L / IN R: Stereo input
- OUT L / OUT R: Stereo output
Technical Specs
Shipping Details
How much is my shipping?
Shipping costs are calculated automatically at checkout. Simply add items to your cart and proceed to the checkout page, where you'll see the available shipping options and their prices. VAT at the applicable rate for your country will also be displayed at checkout.
European Union orders:
- Standard shipping is free on orders over €100. Express shipping is available on orders over €100, and free on orders over €400.
- Free deliveryn and express delivery are not available to islands and remote areas including but not limited to Cyprus, Malta, Ceuta and more throughout the European Union. Add products to your cart and enter your address to confirm yoru shipping charge.
Poland orders:
- Standard shipping is free on orders over 250 PLN. Express shipping is free on orders over 500 PLN.
What about local taxes?
By default prices on the site include sales tax at 20%. The precise sales tax rate for your country will be calculated at checkout.
Do you ship to my country?
We ship to all EU member states from our warehouse in Warsaw, Poland. Add an item to your cart and enter your country and postcode to see the available shipping options and prices for your location. If you have any questions about shipping to your country, drop us an email at info@signalsounds.eu and we'll be happy to help.
Shipping methods
All EU orders are shipped via UPS. We offer two service levels:
- UPS Standard – our default shipping option. Delivery times vary by country (see estimated delivery times below).
- UPS Express Saver – next business day delivery to most EU destinations.
Each product page shows the estimated delivery time for your location, so you'll always know what to expect before you order.
Estimated delivery times (Standard shipping)
The times below are estimates in working days from dispatch, based on UPS Standard service. Express Saver delivers by the next business day to most destinations.
| Country | Estimated delivery (working days) |
|---|---|
| Austria | 2–3 |
| Belgium | 2 |
| Bulgaria | 4–5 |
| Croatia | 2–4 |
| Cyprus | 10 |
| Czechia | 2–3 |
| Denmark | 3 |
| Estonia | 2–3 |
| Finland | 3–5 |
| France | 2–4 |
| Germany | 2 |
| Greece | 5–7 |
| Hungary | 2–3 |
| Ireland | 4–6 |
| Italy | 3–5 |
| Latvia | 2–3 |
| Lithuania | 1–2 |
| Luxembourg | 2 |
| Malta | 5–7 |
| Netherlands | 2 |
| Poland | 1–2 |
| Portugal | 4–5 |
| Romania | 3–4 |
| Slovakia | 2–3 |
| Slovenia | 2–3 |
| Spain | 4 |
| Sweden | 3–5 |
These times are estimates and are not guaranteed. Delivery may occasionally take a little longer due to customs processing, local conditions, or carrier delays.
Dispatch times
Orders placed before 15:00 CET (Central European Time) on a working day are normally dispatched the same day. Orders placed after 15:00 CET, or on weekends and public holidays, will be dispatched on the next working day.
If you have an urgent order, please email us at info@signalsounds.eu before placing your order and we'll do our best to accommodate you.
Pre-orders
If a product is listed as a pre-order, it means we've ordered it from the supplier but it's not physically in stock yet. The product listing will include an estimated shipping date based on the best information we have from the supplier, but do bear in mind this is subject to change and is not a guaranteed date.
If you place an order containing a mixture of in-stock and pre-order items, we'll normally hold off on shipping anything until the pre-order item(s) have arrived, rather than splitting it into multiple shipments. If you need the in-stock items sooner, we'd recommend placing separate orders. As always, please get in touch at info@signalsounds.eu if you have questions.
